Announcement

Collapse
No announcement yet.

Tunnels are not creating automatic routes.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • jcoffin
    replied
    Originally posted by donhwyo View Post

    Is that the release candidate or final. No rc in the file name is confusing.

    Thanks for the checksum.
    It is a release candidate. I have been running it live for almost a month now.

    Leave a comment:


  • donhwyo
    replied
    Is that the release candidate or final. No rc in the file name is confusing.

    Thanks for the checksum.

    Leave a comment:


  • optix
    replied
    Thank you very much, after installing version 17.0 the problem was solved, after setting up the tunnel in the routes appeared:

    = Tunnel VPN Rules =
    tunnel.200:
    172.16.0.0/24 via 172.16.4.137 dev tun200
    172.16.1.0/24 via 172.16.4.137 dev tun200
    172.16.2.0/24 via 172.16.4.137 dev tun200
    172.16.3.0/24 via 172.16.4.137 dev tun200
    172.16.4.0/24 via 172.16.4.137 dev tun200​

    Leave a comment:


  • jcoffin
    replied
    Originally posted by optix View Post
    Same problem starting in version 16.6.2
    Try 17.0 https://launchpad.edge.arista.com/do...irewall/17.0.0

    Leave a comment:


  • optix
    replied
    Same problem starting in version 16.6.2

    = IPv4 Table main =
    172.16.4.137 dev tun200 scope link
    172.16.5.0/24 dev eth1 proto kernel scope link src 172.16.5.1
    192.0.2.0/30 dev br.lxc proto kernel scope link src 192.0.2.1 linkdown
    192.0.2.200/30 dev utun proto kernel scope link src 192.0.2.200
    192.168.103.0/24 dev eth0 proto kernel scope link src 192.168.103.3
    192.168.103.1 dev eth0 scope link

    on other Untangle connected to the same openvpn, the routes look like this:

    = IPv4 Table main =
    135.181.17.128/26 dev eth0 proto kernel scope link src 135.181.17.183
    135.181.17.129 dev eth0 scope link
    172.16.0.0/24 via 172.16.4.5 dev tun200
    172.16.1.0/24 via 172.16.4.5 dev tun200
    172.16.2.0/24 via 172.16.4.5 dev tun200
    172.16.3.0/24 dev eth1 proto kernel scope link src 172.16.3.1
    172.16.4.0/24 via 172.16.4.5 dev tun200
    172.16.4.5 dev tun200 scope link
    172.16.5.0/24 via 172.16.4.5 dev tun200
    172.16.8.0/24 via 172.16.8.2 dev tun0
    172.16.8.2 dev tun0 proto kernel scope link src 172.16.8.1
    192.0.2.0/30 dev br.lxc proto kernel scope link src 192.0.2.1
    192.0.2.200/30 dev utun proto kernel scope link src 192.0.2.200​

    Leave a comment:


  • fear_angel
    replied
    I didn't create rules. In the old version it wasn't necessary... but if it is now I'll have to create it.

    Leave a comment:


  • jcoffin
    replied
    Did you create rules for the tunnels (next tab over). Otherwise, no routes will be created.
    Last edited by jcoffin; 05-18-2023, 07:41 AM.

    Leave a comment:


  • fear_angel
    replied

    No. I don't use openvpn. I am creating tunnels in the "Tunnel VPN" module. I create the tunnels. I save and it connects. But it does not create the routes.​
    I have to create tunnels manually.

    " = IPv4 Table main = "

    10.68.80.0/24 via 173.32.0.6 dev tun201
    10.68.81.0/24 via 172.31.0.6 dev tun200​

    this should create automatically. When I disconnect and reconnect it disappears I have to go through ssh and do it manually.
    Last edited by fear_angel; 05-18-2023, 06:28 AM.

    Leave a comment:


  • gravenscroft
    replied
    Is this OpenVPN? If so, are you including the local networks in your Exported Networks attribute when creating the client(s)?

    Leave a comment:


  • fear_angel
    started a topic Tunnels are not creating automatic routes.

    Tunnels are not creating automatic routes.

    Good morning,

    I installed a fresh 16.4.1 version. I restored a configuration from a version 16.4.1. I updated to the latest version.

    My two tunnels were configured and connected but the routes are not being made. I had to go through the console manually for it to work.

    ip router add 10.68.80.0/24 via 173.32.0.6 dev tun201
    ip router add 10.68.81.0/24 via 172.31.0.6 dev tun200

    When I disconnect the routes are deleted and I have to create them again.
    will this be a BUG? how can I solve?​

    Thanks.
    ​​
Working...
X
😀
🥰
🤢
😎
😡
👍
👎